Understanding More About Hydrogen Sulfide Removal

When you come across water that smells like rotten eggs, you can be sure that it contains hydrogen sulfide of H2S. It is a colorless gas and it gets broken down immediately it comes in contact with water. It then spreads the foul smell of spoiled eggs in the water. The gas does not get away and stays inside the water. It is therefore important to find out ways to remove the gas so that the water can become pure and smell good. When the water is pumped to the surface, the H2S gas escapes and this escape is what leads to the foul smell that we often come across in stored water or even in well water. 

It Could Be A Health Challenge

Drinking water with abnormally high quantities of hydrogen sulfide could lead to nausea and stomach problems. Human beings very rarely consume, water that has unsafe levels of hydrogen sulfide. This is because even a very small content of H2S is enough to make the water foul-smelling. It makes it unfit for human consumption. The rotten-egg odor is enough to put off any human being. This perhaps explains the reason why not many people suffer from the use of water that is infected with high levels of hydrogen sulfide. However, in case anybody drinks water with levels of H2S, he or she can suffer from diarrhea, vomiting and in some rare cases dehydration could also happen. It could be detrimental to the health of newborn children and also young animals and living beings. Any water source that has more than 250 PPM of hydrogen sulfide should be treated before it is used for any purpose.

How Can Hydrogen Sulfide Be Removed

Manganese dioxide in high quantities, hydrogen peroxide, chlorination, and other such methods are commonly used for removal of hydrogen sulfide from the water. This is made 19from suspended solids and has the right turbidity for helping remove H2S from water, whether it is from the ell or even from stored water tankers and other sources.

A high-quality water filter could also play an effective role in removing hydrogen sulfide from the water. The water filter should have the best of fracking and must also have foolproof reverse osmosis treatment system. Cooling tower recirculation is also another way that could help disperse hydrogen sulfide gaseous substances from water and eventually have them removed completely. Any good iron and manganese removal agent should also be good when it comes to removing low to moderate concentrations of hydrogen sulfide from water and also from oil and other sources.

Few More Things To Bear In Mind

When you choose such methods and devices for hydrogen sulfide removal from natural gas, there are a few things that one must bear in mind. It should avoid frequent regeneration and the process of installation of such filters should be simple and cost-effective.

Yes, at the end of the day, you must hire professionals for doing the job and they must be aware of the reasons for buildup of hydrogen sulfide in water in the first place. Without identifying the cause finding the right solution may not be possible.

Contact US:

Chemical Products Industries, Inc.
Address: 7649 SW 34th St, Oklahoma City, OK
Phone: (800) 624-4356

This entry was posted in Chemical and tagged , . Bookmark the permalink.